Smooth matte finish that hides layer lines | Clean, effortless support removal | Compatible with 0.2 mm nozzles and above | Printing speeds from 50–250 mm/s | 1 kg spool
The Anycubic PLA Matte Filament is designed for makers who want their prints to look refined straight off the build plate. Its fine, uniform matte texture minimises the appearance of layer lines, making it an excellent choice for decorative parts, display pieces, anime figurines, and artistic models. Supports peel away cleanly with minimal surface marking, reducing the need for post-processing. With a recommended printing temperature of 190–230 °C, a heated bed temperature of 60–65 °C, and compatibility with nozzles 0.2 mm and above, it fits comfortably into most FDM setups. Print speeds of 50–250 mm/s keep workflow efficient. For best results, dry the filament at 55–65 °C for 6–8 hours before use. A reliable 1 kg spool of matte white PLA for projects where finish and presentation matter.
Features
- Matte finish reduces visible layer lines for cleaner, more polished prints
- Supports remove cleanly and easily, minimising post-processing
- Compatible with nozzles 0.2 mm and above
- Recommended printing speed of 50–250 mm/s
- Printing temperature range: 190–230 °C; heated bed: 60–65 °C
- Active drying recommended at 55–65 °C for 6–8 hours before use
- 1 kg spool
Specifications
- Colour: Matte White (#F1F0ED)
- Dry Out Before Use: Recommended
- Drying Condition: 55-65℃, 6-8h
- ACE Compatibility: Compatible
- Nozzle Size: Recommended 0.2 mm or above
- Printing Temperature: 190-230 ℃
- Heated Bed Temperature: 60-65 ℃
- Recommended Printing Speed: 50-250 mm/s
- Cooling Time: 8 s
- Maximum Volume Speed (Flow Rate): 12 mm³/s
- Density: 1.25 g/cm³
- Melt Index: 8±3 g/10 min (190℃/2.16kg)
- Melting Point Temperature: 163 ℃
- Vicat Softening Temperature: 57 ℃
- Heat Deflection Temperature (0.45MPa): 54 ℃
- Young’s Modulus: 2600±150 MPa
- Tensile Strength: 38±2 MPa
- Elongation at Break: 13±4%
- Bending Modulus: 3200±100 MPa
- Bending Strength: 67±2 MPa
- lzod lmpact Strength (X-Y): 19±1 kJ/m²
- Tensile Strength (Z): 12±2 MPa
- Filament Type: Aesthetic filaments
- Recommend to Print: Decorative parts, fandom, artworks, anime figurines
- Intelligent Identification: Supported
- Reusable Filament Spool: Supported
- Size: 1KG
What’s in the Box
- Anycubic PLA Matte Filament 1kg – White x1
