Silk-smooth dual-colour gradient | Blue/Green colour blend | Compatible with 0.4 mm nozzles and above | Printing speeds 50–250 mm/s | Supports intelligent filament identification
The Anycubic PLA Silk Dual Filament in Blue/Green is designed for makers, hobbyists, and artists who want their FDM prints to stand out with a rich, layered colour gradient and a lustrous silk-like finish. The dual-colour formulation blends a deep blue (#003594) with a forest green (#006F44), producing a flowing colour transition across every layer that shifts and catches the light as the model is rotated. By adjusting the nozzle temperature within the 210–240 °C range or varying the print speed between 50 and 250 mm/s, you can dial in the level of surface gloss — higher temperatures and slower speeds yield a smoother, higher-sheen finish, while cooler, faster settings produce a more matte result. The filament has been tested through thousands of bending and tearing cycles to ensure consistent feeding and uninterrupted print runs, and it carries an embedded intelligent identification chip that allows compatible Anycubic printers to read filament information automatically. Ideal for decorative parts, fan art, and display pieces, this filament works with any 1.75 mm FDM printer fitted with a 0.4 mm or larger nozzle.
Features
- Dual-colour gradient blends blue (#003594) and green (#006F44) for a rich, layered visual effect
- Silk-like luster shifts appearance with viewing angle, giving prints a premium, sophisticated finish
- Adjustable gloss — tune nozzle temperature (210–240 °C) and print speed (50–250 mm/s) to control surface sheen
- Embedded intelligent identification chip integrates with compatible Anycubic printers for automatic filament recognition
- Tested for superior flexibility and durability through thousands of bending and tearing cycles
- Compatible with any 1.75 mm FDM printer using a 0.4 mm or larger nozzle
- Suited for decorative parts, fandom models, and artistic display pieces
Specifications
- Colour: Blue Green (#003594,#006F44)
- Dry Out Before Use: Recommended
- Drying Condition: 55-65℃, 6-8h
- ACE Compatibility: Compatible
- Nozzle Size: Recommended 0.4 mm or above
- Printing Temperature: 210-240 ℃
- Heated Bed Temperature: 55-56 ℃
- Recommended Printing Speed: 50-250 mm/s
- Maximum Volume Speed (Flow Rate): 8 mm³/s
- Density: 1.22 g/cm³
- Melt Index: 9±1 g/10 min (190℃/2.16kg)
- Melting Point Temperature: 164 ℃
- Vicat Softening Temperature: 54 ℃
- Heat Deflection Temperature (0.45MPa): 53 ℃
- Young’s Modulus: 2000±200 MPa
- Tensile Strength: 37±4 MPa
- Elongation at Break: 28±5%
- Bending Modulus: 2400±160 MPa
- Bending Strength: 66±4 MPa
- lzod lmpact Strength (X-Y): 20±2 kJ/m²
- Tensile Strength (Z): 12±4 MPa
- Filament Type: Aesthetic filaments
- Recommend to Print: Decorative parts, fandom, artworks
- Intelligent Identification: Supported
- Reusable Filament Spool: Supported
- Size: 1KG
What’s in the Box
- Anycubic PLA Silk Dual Filament 1kg – Blue/Green x1
