Installation Type | Wall,Ceiling,T-Rail |
Dimensions without packaging (H x W x D) [mm(in.)] | Diameter x depth: 220 mm x 53 mm (8.66 in. x 2.09 in.) |
Dimensions with packaging (H x W x D) [mm(in.)] | 93 mm x 284 mm x 251 mm (3.66 in. x 11.18 in. x 9.88 in.) |
Weight without packaging [kg(lb)] | 1.22 kg (2.69 lb) |
Weight with packaging [kg(lb)] | 1.76 kg (3.88 lb) |
Storage | NAND Flash 512 MB |
Console port | BLE console |
Maximum power consumption [W] | 22.6 (excluding USB) |
Maximum heat dissipation [BTU/hour] | 77.1 (without USB) |
Power supply mode | PoE,DC power adapter |
Input voltage range [V] | DC: 42.5 V to 57 V |
PoE: 802.3at/af | |
Service port surge protection | PoE port: |
Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B | |
Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B | |
PoE OUT | Not supported |
Relationship between PoE and system power modules [W] | No priorities are distinguished for the following power supply modes: DC power supply, PoE power supply over an Ethernet cable, and PoE power supply over a hybrid cable, which do not support hot backup. |
Either of the electrical port or the SFP+ hybrid port can be used for PoE input, but not both. | |
Maximum number of physical ports on the entire device | 2.5GE (RJ45) x 1, 100M/1000M/2.5GE auto-sensing |
10GE (SFP+) x 1, 1000M/10GE auto-sensing | |
Either the 2.5GE electrical port or SFP+ optical port can be used for data communication at the same time. If both ports are connected, the optical port is preferentially used for communication. | |
Long-term operating temperature [°C(°F)] | –10°C to +50°C (14°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
Atmospheric pressure [kPa] | 53kPa – 106kPa ETSI 300 019-2-3 |
Ground | Floating ground |
USB | USB 2.0 |
IoT slot | Not supported |
BLE | BLE5.2 |
Radio number | 2 |
Operating frequency band | 2.4GHz,5GHz |
MIMO spatial streams | Radio 0 (2.4 GHz): 4×4 |
Radio 1 (5 GHz): 4×4 | |
Wi-Fi standard | 2.4 GHz: 802.11b/g/n/ax |
5 GHz: 802.11a/n/ac/ac Wave 2/ax | |
Radio interface | Built-in Dynamic-Zoom Smart Antennas |
Antenna gain | 2.4G: |
4.5 dBi/chain (peak value) | |
2 dBi (combined gain) | |
5G: | |
5.5 dBi/chain (peak value) | |
3 dBi (combined gain) | |
BLE: 4 dBi | |
Beamwidth of the built-in antenna [degrees] | – Common indoor coverage scenario: omnidirectional coverage |
– Indoor high-density coverage scenario: lobe angle of 120° | |
Maximum transmit power | 2.4 GHz: 26 dBm |
5 GHz: 26 dBm | |
(Note: This is the total MIMO radio power, the same as: | |
2.4 GHz: 20 dBm/chain | |
5 GHz: 20 dBm/chain) | |
BLE: < 10 dBm | |
MTBF [year] | 69.7 |
MTTR [hour] | 0.5 |
Frequency stability [ppm] | #ERROR! |
802.3at power supply description | Wi-Fi: |
– If the USB port is not used or the USB port works at the 2.5 W output power, there is no restriction. | |
– If the USB port works at the 5 W output power, the number of MIMO spatial streams on the 2.4 GHz radio decreases to 2×2. | |
Wired network port: Either the 2.5GE electrical port or SFP+ optical port can be used for data communication at the same time. If both ports are connected, the optical port is preferentially used for communication. | |
802.3af power supply description | Wi-Fi: |
The number of MIMO spatial streams decreases to 2×2 on the 2.4 GHz frequency band, the maximum combined power is 23 dBm, and the 5 GHz frequency band is unavailable. | |
Wired network port: | |
– In V200R021C00, the rate of the 2.5GE electrical port is reduced to GE and the SFP+ optical port is unavailable. | |
– In V200R021C10 and later versions, either the 2.5GE electrical port or SFP+ optical port can be used for data communication at the same time. If both ports are connected, the optical port is preferentially used for communication. | |
Other ports: | |
The USB port is unavailable. | |
DC power supply description | Either the 2.5GE electrical port or SFP+ optical port can be used for data communication. If both ports are connected, the optical port is preferentially used for communication. |
Huawei AirEngine 6761 21 WIFI 6 Access Point
Original price was: R11,669.00.R10,729.00Current price is: R10,729.00.
Price includes a 2% EFT discount. Card payment price is R10,944.00 or R2,736.00 x 4 monthly payments.
Only logged in customers who have purchased this product may leave a review.
Delivery
Our shipments are handled by reputable courier companies, striving for prompt delivery. However, should unexpected delays occur we will attempt to inform you as soon as we receive notification from the courier companies. The below shipping estimates apply:
- Johannesburg & Pretoria: 1–3 business days
- Cape Town & Durban: 2–4 business days
- Rest of South Africa: 3–7 business days
Collection / Pay on collection:
You may also collect and pay your order, from our offices in Centurion. Please wait for confirmation that your order is ready before coming for collection.
Our full delivery policy can be found here: Delivery Policy
Reviews
There are no reviews yet.